Page Title

Text Box: 101-21C CIA-Gel 7000 Epoxy Designed to be used where consistently high strength adhesive is required. Backed by extensive research and testing.

Text Box: 103-21C CIA-Gel/R Fast Set Epoxy Designed to be used for cold weather applications and as a temporary surface seal for crack injection applications. Recommended for best results when temperature is below 60° F.

Text Box: 102-21C CIA-Fluid Epoxy CIA-Fluid is designed to be used where self leveling is required.

Text Box: Features Damp or wet applications Meets ASTM C881 Fast curing 100% solids Moisture insensitive ICBO approval

Text Box: Bond Strength Slant/shear strength: 6,000 PSI (ASTM C-882) 7 day cure at room temperature (epoxy) All breaks in concrete. No failure in bond line.

Text Box: Cured Properties Compressive strength (ASTM D 695): 18,530 PSI Tensile strength (ASTM D 638): 5,230 PSI Tensile elongation (ASTM D 229): 1.4% Heat Deflection Temperature: (ASTM D 648): 128° F

Text Box: Attach sill plates to concrete Rebar doweling into concrete

Text Box: Attaching threaded rod or rebar into grout filled (solid) concrete block Attaching threaded rod or rebar into hollow concrete block

Text Box: The values listed above are ultimate load capacities and should be reduced by a minimum safety factor of 4 to determine the allowable working load. However, factors of safety required are application dependent and should be determined by the user or design engineer. Job site tests should be conducted to determine actual load capacities.

Anchors and Fasteners