Text Box: The setting times listed for the Acrylic-100 adhesive vary according to the base material temperature. The gel time is the maximum time during which the adhesive can be dispensed before it begins to set. The setting time is the minimum time required for the Acrylic-100 adhesive to reach its published capacities. Text Box: Ultimate load capacities for installations using threaded anchor rod in concrete. Text Box: Power-Fast Cartridges Text Box: Power-Fast Epoxy Injection Gel Setting Time Text Box: The setting times listed for the Power-Fast epoxy vary according to the volume of epoxy used and the base material temperature. The gel time is the maximum time during which the epoxy can be dispensed before it begins to set. At the minimum curing time the epoxy can support a design load, however this should be verified by job site testing. The full curing time is the minimum time required for the epoxy to reach its published physical properties. Text Box: To estimate: Use chart in back of book. Multiply 21 oz. figures by 0.5 for 10 oz., 0.7 for 15 oz., and 1.15 for 24 oz. cartridges. Text Box: Powers Acrylic 100 Text Box: Base Material: Solid concrete, block, brick, stone, or masonry. Size Range: 3/8” to 1” anchor rod No. 3 to No. 8 reinforcing bar Anchor Material: acrylic epoxy resin Shelf Life: 12 months Storage Conditions: store dry at 40° to 90° F Color: Gray Usable Volume: 7.9 fl. Oz. (235 ml) Text Box: Acrylic-100 Setting Time Text Box: Acrylic-100 Performance Data Text Box: To estimate: Use chart in back of book. Multiply 13 oz. figures by 0.6.
Previous Page
Next Page
Anchors and Fasteners