Text Box: Advantages:
Single part use eliminates time, effort, and equipment for mixing.
Fast tack free and final cure times.
High elasticity.  Cures to a tough, durable, flexible   consistency with an exceptional cut and                    tear resistance.
Stress relaxation.
Excellent adhesion.  Bonds to most construction      materials without a primer.
Excellent resistance to aging and weathering.
USDA approved.
Odorless and non-staining.
Paintable with water, oil, and rubber based paints.
Capable of ± 25% joint movement.
Jet fuel resistant.
NSF approved for potable water contact.
Suggested by EPA for radon reduction.
Sealant, Waterproofing, and Restoration Institute (SWRI) validated.
Text Box: SikaGrout® 212
A high performance cementitious structural grout.

Uses:
Structural grouting of column base plates, machine base plates, anchoring rods, etc.
Use on, above, and below grade indoors and out.
Ram in place as a dry-pack, trowel apply as a medium flow, pour or pump as a high flow.

Advantages:
Easy to use, just add water.
Multiple fluidity with one material.
Excellent for pumping, does not segregate at high flow.
Non-metallic, will not stain or rust.
Non-corrosive, does not contain chlorides.
With a special blend of shrinkage-reducing and       plasticizing/water-reducing agents, SikaGrout 212    compensates for shrinkage in both the plastic           and hardened states.
Low bleed and heat build up.
Superior freeze/thaw resistance.
Resistant to oil and water.
Meets CRD C-621 and ASTM C-1107 (grade C).

Coverage: Approximately 0.44 cu. Ft. per 50 lb.
bag at high flow.
Text Box: SikaTop® 123 Plus
A high performance non-sag repair mortar.
Uses:
On, above, and below grade on concrete and mortar.
On vertical and overhead surfaces.
As a structural repair material for parking facilities,    industrial plants, water/waste water treatment facilities, roads, walkways, bridges, tunnels, dams, ramps, etc.
Repairs over cathodic protection systems.
Advantages:
Enhanced with FerroGard 901, a penetrating            corrosion inhibitor—reduces corrosion even in            the adjacent concrete.
High compressive and flexural strength.
High early strengths.
Increased freeze/thaw durability and resistance to    deicing salts.
Increased density—improved carbon dioxide             resistance (carbonation) without adversely affecting water vapor transmission (not a vapor barrier).
Not flammable, non-toxic.
Conforms to ECA/USPHS standards for surface      contact with potable water.
Compatible with coefficient of thermal expansion of concrete—Passes ASTM C-884 (modified).
USDA approved.
ANSI/NSF standard 61 potable water approved.
Yield:
1 gal. component ‘A’ and 1 bag (44 lbs) component ‘B’
Yields approximately 0.39 cu. ft.
Text Box: SikaFlex®-1A
One part high performance polyurethane based elastomeric sealant/adhesive
Text Box: Uses:
All types of joints where maximum sealant depth will not exceed 1/2”.
Excellent for small joints and fillets, windows, door frames, reglets, flashing, and many construction       adhesive applications.
Suitable for vertical and horizontal joints.
Readily usable at 40°F.
Applications as an elastic adhesive  between materials with dissimilar coefficients of expansion.
Submerged conditions such as canal and reservoir joints.

Coverage: One 10.3 oz. cartridge will seal approximately 12.4    linear feet of 1/2” x 1/4” joint.
Previous Page
Next Page
Concrete Repair Products